
This is also part of a Miley Cyrus “I Want to Be Your Friend” gift package project.
🎁 Burning Man Gift Concept: “Nothing Compares 2 U” Audible Fridge Gift
-
Concept: Rather than capturing a photo, participants capture a 10-second audible memory with a friend. Press record, speak your truth, play it back. Magnetic, hangable, and touchable.
-
Power: 3V coin cell should be enough for short messages. If it’s not holding charge well under load, consider a small Li-ion 3.7V cell (like 102030).
-
Aesthetic: Decorate with feathers, glitter, laser-cut silhouettes, or a heart-shaped paper tag saying “Nothing Compares 2 U”.
🛠️ Engineering Schematic & Parts List for ISD1820 Audible Gift (No Arduino Version)
🔧 Parts List (with links)
-
ISD1820 Voice Recorder Module
-
Description: Simple record/playback board with built-in mic and speaker pins
-
Buy on Amazon | AliExpress
-
-
8Ω 0.5W Mini Speaker
-
Compact and loud enough for a short playback
-
Amazon | AliExpress
-
-
CR2032 3V Coin Cell Battery + Holder (Note: Some modules work down to 3V but check the amp draw)
-
SPST Mini Push Button (Record + Play)
-
Use 2x buttons or re-route the onboard ones with wires
-
-
Fridge Magnet Backing (Optional)
-
Thin neodymium sheet or soft rubber magnet
-
-
3D-Printed or Laser-Cut Case (Optional lightweight enclosure)
-
Use PLA, acrylic, or even repurposed bottle caps
-
🧩 Basic Schematic (ISD1820 Standalone Version)
[Battery + (CR2032)] —-> [VCC on ISD1820]
[Battery –] ————–> [GND on ISD1820]
[SPK+ and SPK–] ———> [Mini 8Ω speaker]
[Record Button] ———> [RECORD Pin to GND] [Play Button] ———–> [PLAYE Pin to GND]
💡 You can wire buttons to the front of the case, letting users record or playback. Use “edge trigger” on PLAYE so playback stops when released.

💰 Angel Donor Breakdown for 500 Units

→ Total: $1,850–$2,850 (sometimes you can get things in kits that include some line items)A ~$2K angel donor could make it happen at scale. Even more if assembly gets community help.
